The Biro EMG-32 is a top - notch mixer grinder model. The auger motor runs at 7 1/2 HP with 208V, 60 Hz, 3 - phase power. The mixer motor operates at 3/4 HP, also with 208V, 60 Hz, 3 - phase. Other voltages are available by calling the factory, and 50 Hz option is there too. The drive system features a single - reduction drive chain for the auger and a double - reduction chain drive for the mixer. It comes with a size 32 bowl that uses size 32 plates and knives. The hopper can hold up to 150 lbs. For output capacity, it can grind up to 80 lbs. per minute in the first grind and 56 lbs. per minute in the second grind. The machine's dimensions are 52' x 29' x 52', and the shipping dimensions are 61' x 37' x 62'. Check out the spec sheet for more details.

Using the Biro EMG - 32 mixer grinder is quite simple. First, make sure the power supply matches the machine's requirements (208V, 60 Hz, 3 - phase as default, but others are available). You can load up to 150 lbs. of material into the hopper. When you start the machine, the auger will start moving the material, and the mixer will do its job of grinding. For the first grind, you can expect an output of up to 80 lbs. per minute, and for the second grind, up to 56 lbs. per minute. Always remember to call the factory if you need a different voltage. As for maintenance, regularly check the drive chains (single - reduction for the auger and double - reduction for the mixer) for any signs of wear. Also, keep the bowl clean and make sure the size 32 plates and knives are in good condition. If you notice any problems, refer to the spec sheet or contact the manufacturer.